| Products |
Description |
Price |
Flex-Tex
4oz |
Proffessional
Texturing Product
APPLICATION : Flex- Tex makes many different grains. Use a preval
sprayer to spray flex tex onto the repair area. The more material
in the mix the more of a grain there will be. If you thin flex
tex the grain will be a finer texture. You may also press a
grain pad into wet flex tex to get a more perfect copy of the
grain. Product is an air dry and it is sandable.
|
$9.95
|
| Graining
Papers Set of 7 |
A set of
seven graining papers with the most popular grains embedded
in them.
APPLICATION : Press in last coat will hot. |
$7.00 |
Grain
Pad Set (15) |
A set of
fifteen graining pads with the most popular grains embedded
in them.These pads have a vinyl backing to help identify the
pattern of the grain.
APPLICATION : Press in last coat will hot.
|
$99.00 |
| Catalyst
For VM-18 (1/2oz) |
Hardener
for VM-18 grain mould compound.
APPLICATION : Add 6 to 8 drops per ounce of VM-18.
|
$7.50 |
Catalyst
For VM-18 (1/4oz) |
$4.95 |
| Spray
Grain 4oz |
A
clear water borne urethane spray texture.
ITEM FEATURES : Produces a pebble effect - Exceptional toughness,
flexibility, and abrasion resistance - Sandable.
APPLICATION : Apply with preval, mouth atomizer, crown spray
tool or spray gun - Excellent coverage on dash, vinyl or leather
repairs.
ADDITIVES (as needed): Crosslinker - Tinting Pigments, Flex
additive - SLIP additive - Flat Ayd or Dulling Agent.
|
$7.00 |
Spray
Grain 8oz |
$12.00 |
| Spray
Grain 16oz |
$22.00 |
Spray
Grain 32oz |
$38.00 |
|
Pro Tex 2 Part Kit A&B |
One of
the best spray grains on the market.
APPLICATION : Spray repair area with a wet coat of part A. Allow
a few seconds to start to dry, then top with part B. The heaver
the B coat the larger the grain will be. The less B coat, the
smaller the grain will be. Can warm lightly with heat gun.
|
$14.95
|
Pro
Tex Part A |
Part A
of Pre Tex Kit. (White)
APPLICATION : See Pro Tex Kit.
|
$7.50 |
| Pro
Tex Part B |
Part B
of Pr Tex Kit. (Black)
APPLICATION : See Pro Tex Kit.
|
$7.50 |
Grain
Mould Compound 4oz |
A
white silicone compound used for making grain impressions.
APPLICATION : Using approximately one ounce of compound per
pad,mix with 6 to 8 drops of the catalyst (R),then pour the
compound on the area you want to duplicate the grain of. Spread
evenly with a palette knife,then tap around area to remove air
bubbles and let dry.
|
$11.00
|
| Grain
Mould Compound 8oz |
$24.00 |
Grain
Mould Compound 16oz |
$42.00
|
| Grain
Mould Compound 32oz |
$70.00 |
